|
|
 |
|
 |
Corrosion-Proof Type Control Switches |
| ■ |
For the rubber packing between case and cover, the overall- surface packing method is adopted; hence perfect air-tightness is maintained, and even in the case of repeated tension due to push-button operations, no deterioration will occur. |
| ■ |
The case cover is made of premixed resin, which has outstanding corrosion-proofing as compared with ordinary steel or cast-iron plates. Further, since stain-less steel is used for cover-fixing screws and padlock-locking plate, there is no need to worry about corrosion. |
| ■ |
For the OFF push-button, the locking unit using a padlock plate is a standard type; hence by padlocking, it is conformed to Article 107 (2) of the Labor Safety and Hygiene Regulation. |
|
 |
 |
Explosion-Proof Type Control Equipments |
| ■ |
To prevent explosions or fires caused by the electrical equipments, every effort should be made. As aprerequisite. to minimize possible danger of explosion at a location where they are to be installed. |
| ■ |
The electrical equipments should be installed at a location with a minimum posibility of explosion. In case, however. they are unavoidably installed at a hazardous location where explosion is expected, It should be limited to a minimum extent. |
| ■ |
The explosion-proof electrical equipments to be installed should be the products that have been proved to fully meet the requirements. |
|
|
 |
Low- Voltage Motor Control Center L Type |
L-type Control Center is the product which enables the provision of saving space and low price by making the best use of customer's voice and pursuing the thorough rationalization for the purpose of control and protection of motor and the other load in the low-voltage distribution system. |
|
|
 |
Low-Voltage Motor Control Center S type |
Model S Low-Vo-tale motor Control centers have the features that Combine to yield Safety, economy, reliability, and maintenance ease.
|
|
|
 |
Low -Voltage Switchgear |
High Reliability LV Switchgear That is Also Remarkably Cost-efficient, Safe, and Easy to Maintain. |
|
|
 |
High-Voltage Metal-Enclosed Switchgear |
| ■ |
Epuipment is mounted in compartments formed by a grounded metal partition.
|
| ■ |
Equipment is mounted in individual compartments, just as in the metal clad type. with one or more non-metal partitions meeting equal protection class to Metal clad type. |
| ■ |
All other types. Small number of compartments. Without partition. With partition. but not satisfied the protection class. |
|
|
|
|
